Headless Woodcraft electric guitars Dual Pickup AmpMaster 4 Bass Short Scale 30″ – Satin Dakota Red

New from Woodcraft Electric Guitars: The AmpMaster HL Headless Bass 30″ Satin Dakota Red

Super light, actual weight 6 Pounds only!

Woodcraft Electric Guitars AmpMaster 4 string Bass 30″ Short Scale, super light, text us for exact weight.

Alder body, Hard Rock Maple Neck with Venge Fingerboard

“Easy-Wheel” Dual Action Truss Rod and 2 pcs of Double Titanium Reinforcement Rods. All Woodcraft basses utilize Dual Truss Rods “Easy Wheel” truss rod adjustment system made from Titanium to maintain neck stiffness, stability and reduce weight. Easy Wheel allows you to make the adjustment on the spot without special wrenches.

There are a lot of basses on the market with a tendency to have weak neck binding structures due to high string tensions. For this reason, two Titanium rods are applied to all bass guitars.

TUSQ NUT: The nut is one of the most important parts of the bass that influences the performance, playability, and tone of the instrument. Depending on the quality of the material, the nut can either improve or degrade the sound. Although the TUSQ nut is more costly and harder to work with, it is considered to deliver more balanced, clearer and smoother tones than brass, corian or other materials.

ACCURATE AND STABLE TUNING: This Headless bass comes with a Newly designed bridge made by Albridge specifically for this headless bass, It’s made from very high quality lightweight aircraft grade Duraluminum, and the saddles are made of pure Bell Bronze and extra-hard tension saddle springs to eliminate annoying parasitic rattles/vibrations coming from other types of bridges, the string retainers on the headstock and Fine tunning bridge gear are made from Military grade stainless steel. This bridge has been manufactured to deliver you the best possible tone, and to last a lifetime

2 Albridge parts hand wound Split Coil pickup, dual poled noise free, NO 60 cycle Hum.

Custom wiring CTS pots with disk filter capacitor, graphite cavity shielded

Volume, Blend, Tone controls

Neck plate 6 holes Duralumin, light

BRIDGE: This bass comes with an ALBRIDGE parts Custom Light Weight Duralumin bridge, Air space grade with Bell Bronze saddles and extra-hard tension saddle springs to eliminate annoying parasitic rattles/vibrations coming from other types of bridges. String space 18mm.

Ampmaster neck: Nut size 38.1mm, at 20th fret 60mm

Width under 1st fret 20mm, 12th fret 22.5mm

Fretboard Radius 12”

Fret’s width 2.8mm (0.11”)

Bass Overall length is 36 1/2 in., 12 1/4 in. (31.1 cm.) wide at lower bout,

and 1 1/2 in. (3.8 cm.) in depth, measured at the side of the rim. Scale length is 30 in. (762 mm.).

Thank you for buying Woodcraft Electric Guitar product, North Hollywood, California U.S.A. ASBX